MMTS About Products Services FAQ Links Team Contact
MMTS Logo

Products

MMTS offers a wide range of engineering products to the plastic conversion and recycling industry. This includes the manufacture of barrels, screws, granulators, nibblers, complete extruders, screen changers, and a host of parts and accessories.

Extruder Barrel

Extruder Barrels

In the process of extrusion, screws are used to process the raw material into a usable form to make the final product required. however, the performance of the screw is dependant on numerous factors, and we design and manufacture all types of barrels, single and twin. We have the capacity to handle barrels up to 6m in length from all manufacturers (1).

We can manufacture a nitrided NiCrAl steel barrel in approximately 2-3 weeks depending on it's size and design complexity. All work is done in-house except heat treatment which we subcontract to our specialist engineering partners.

We also manufacture bimetallic barrels from imported blanks that we keep in stock. A bimetallic barrel can be made in as little as a week and they offer superior wear resistance for customers who are using particularly abrasive materials such as recycled post-consumer films, titanium whiteners , calcium carbonate fillers and glass fillers.

Extruder Screw

Extruder Screws

We have the ability to design and manufacture almost any type of extruder screw, from cross-linked polyethylene to soap and even cellulose. We can manufacture a screw in as little as two weeks in our works, including heat treatment time. Bimetallic screws can be imported in any design from our international suppliers.

Injection Moulder Barrel

Injection Moulder Barrels

In the process of injection moulding, screws are used to process the raw material into a usable form to make the final product required. however, the performance of the barrel is dependant on numerous factors, and we design and manufacture all types of barrels, both bimetallic and nitrided in construction. We have the capacity to handle barrels up to 6m in length from all manufacturers(1).

Injection Moulder Barrel

Injection Moulder Screws

In the process of injection moulding, screws are used to process the raw material into a usable form to make the injection and the forming final product required within the die cavity. however, the performance of the screw is dependant on numerous factors, and we design and manufacture all types of screws, single and twin. All work is done in-house except heat treatment which we subcontract to our specialist engineering partners. We have the capacity to handle screws up to 6m in length from all manufacturers(1).

Screw Tip Sets

Tip Sets

We manufacture both replacement and custom-designed tips sets for injection moulders. If you are experiencing problems with limited shot weight, poor cushion retention and long cycle times, we can design a tip to suit your process. All our tips are made with specialised NiCrAl nitriding steel and are heat treated and/or nitrided depending on the requirements. We also make specialised ring-less PVC injection moulder tips.

Injection Nozzle

Injection Moulder Nozzles

If you need to replace a broken or worn nozzle or want to increase the length of your nozzle, we can manufacture a new one either according to your design or a design by our experienced team.

Breaker plate

Breaker plates

We make hardened tool steel breaker plates of any size and any number of holes.

Gearbox Repairs and Refurbishment

Gearboxes

Not just for extruders, all types of industrial gearboxes.

We supply new, service, repair and recondition extruder, injection moulder, shredder and granulator gearboxes as part of our regular business. We can also assist with any type of industrial gearbox.

Screen Changer

Screen Changers

We manufacture manual and hydraulic screen changers for extruders from as small as 25mm to as large as 180mm in diameter.

Barrel End Cap

Barrel End Caps

If you need to replace a broken end cap or want to increase the bore of your injection moulder, we can manufacture an end cap either according to your design or a design by our experienced team.

Tie Bars

Pitcture by Glenn McKechnie / CC BY-SA

Tie Bars

We manufacture all types of tie-bars.

Tie bar tolerances are critical to the efficient operation of injection moulders, and we are able to manufacture tie-bars up to 6m in length by machining, grinding, chroming and finishing to original equipment specification and quality levels.

Rotary Joints (Unions)

Rotary Joints (Unions)

We can supply rotary joints for water or oil cooling rubber, PVC and other extruder screws that require lower processing temperatures. We supply dual flow, siphon-type rotary unions which are uniquely designed for the extrusion process.

Extruder Screw

Pipe Calibrators

We have manufactured numerous pipe and profile calibrators, both atmospheric and vacuum in design.